Seaspension

SEASPENSION® shock-absorbing pedestal system will provide you with a ride which until now has been virtually impossible to duplicate.

SEASPENSION® can be used as a stand-alone solo post, as a dual post bench seat, or as a tripod bolster seat.

Our innovative shock-absorbing pedestals are designed to retrofit most boats which currently have conventional rigid posts.

The SEASPENSION® Solo Post is designed to bolt directly to your existing universal slider or spider slider combination. This means you can keep your current hardware and seat.

All pedestals have a shock travel of 3 ½ inches for optimal performance and safety.
The shock-absorber has a stainless steel progressively rated coil-over spring and has proprietary valving for both compression and rebound strokes.
That means that the initial compression is relatively soft and gets progressively stiffer. The damper valving senses the speed by which the unit compresses, so it can do its job properly. No Pogo stick here!

This patented shock-absorbing pedestal is designed to be mounted to most seats or a universal flat-bottomed seat slider for fore and aft movement. The Post swivels 360° with auto-lock forward facing feature. Proper orientation is required for installation. The round base is a standard 9 ¼” OD with a 6-hole bolt pattern. Proper operating range is between 140 -275 lbs(64-125 Kg) total seated weight. Please consult us for different weihts or other special applications.

Heights:
16 in (40.64 cm)
19 in (48.26 cm)
22 in (55.88 cm)
25 in (63.50 cm)

This patented shock-absorbing dual pedestal system is designed to be mounted to most seats or a universal flat-bottomed seat slider for fore and aft movement. Two standard posts are utilized to accommodate larger helm chairs and greater seated weights. A custom deck plate is included which allows the pedestal system to be adapted into a standard round 8 ¼”, 6-hole bolt pattern.

Heights:
16 in (40.64 cm)
19 in (48.26 cm)
22 in (55.88 cm)
25 in (63.50 cm)

The Inverted Model retains all of the features of the Solo Post in only 11"(28cm) of height. It comes with a stylish tapered bellows and can be ordered with an optional PVC cap to waterproof the pedestal in situations where it is installed in a live well or bait box under the seated area. Inverted Models require an approx. 5" X 6" hole to be cut in the mounting surface or deck. Access to the underside of mounting surface or deck is required for installation. The Inverted pedestal can also be ordered as a Bench (2413) model. Proper operating range is between 140 -275 lbs (64-125 Kg) total seated weight. Please consult us for different weihts or other special applications.

The two independently operating shock-absorbing pedestals are designed to function properly even when two occupants of different weights are seated. For benches over 48” or heavy duty applications, three pedestals are recommended. Posts are sold separately. Please consult us for your special applications. We recommend flat-sided bases for the outside bench posts to minimize the total footprint. Flat-sided bases measure 9-¼” fore and aft and 6” in width.

These shock-absorbing pedestals are designed to accept your spider/slider which fits over a 2-7/8” OD standard pedestal tube. This allows 360° swiveling. The round base is a standard 9-¼” OD with a 6-hole bolt pattern. Proper operating range is between 140 -275 lbs (64-125 Kg) total seated weight. Please consult us for different weihts or other special applications.

Heights:
20 in (50.82 cm)
23 in (58.42 cm)
25 in (63.50 cm)
29 in (73.66 cm)

Off-Shore pounding, racing and severe duty such as military applications call for the tripod bolster. The triangular configuration ensures maximum strength in extreme conditions. Bolsters are designed with either a sit-down or drop down seat configuration. Single or double bolster seats are available. Due to the many application variables, we can custom manufacture any model. Please consult us with your special application.